Tandberg 1500MXP Bedienungsanleitung

User Manual Software version F4 D13642.05 March 2006 This document is not to be reproduced in whole or in part without permission in writing f

TANDBERG 1500 MXP x 3.12.4 Chair Control...

TANDBERG 1500 MXP 88 3.13.6 View Administrator Settings This window displays all the system settings. Use the arrow key on the remote control to s

General Use 89 PC Document Camera VCR AUX VNC Split Screen Default Call Settings Call Type Network Bandwidth Restrict (56k) Auto H320 Bandwid

TANDBERG 1500 MXP 90 White balance Brightness Video Name Main Cam AUX Doc Cam VCR PC VGA VNC Network Type ISDN-BRI\PRI\Leased E1\T1\Enternal H331 I

General Use 91 IP address IP subnet mask Gateway Ethernet Speed H.323 Settings E.164 Alias Use Gatekeeper Gatekeeper IP H.323 Prefix Advanced H

TANDBERG 1500 MXP 92 3.13.7 IP Address Conflict Check The system will give a warning if there is an IP conflict. The user may initiate this check

General Use 93 3.13.8 Warnings Any warnings registered by the system will be displayed in the Warnings menu. Open a warning in the list to get mor

TANDBERG 1500 MXP 94  There is something wrong with the Leased E1/T1 line (Blue alarm). Please check your network connection. (192)  There is

General Use 95 3.13.9 Text Chat While in an ISDN or IP call to another system supporting Text Chat (T.140), select Text Chat from the Control Pan

TANDBERG 1500 MXP 96 3.13.10 Audio Demo Note that the Audio demo will only appear in the User Guide if a Digital Natural Audio Module is connected

General Use 97 3.13.11 Administrator Settings Administrator Settings contains the configuration of the whole system. It is recommended to passwor

User Manual xi 4.4.6 Video Quality... 144 4.4.

TANDBERG 1500 MXP 98 3.13.12 Restart Restart the system by pressing the Restart button. You are prompted with a dialog box saying: Do you want to

General Use 99 3.13.13 User Guide The on screen user guide takes you through a quick step-by-step introduction to videoconferencing. It gives the

4 Administrator Settings Administrator Settings contain all the settings of the system. Making changes to Administrator Settings will change the

Administrator Settings 101 4.1 General Settings When installing the system, go through the General Settings menu to ensure that you have the right s

TANDBERG 1500 MXP 102 4.1.1 Language The system supports 16 different languages for its on-screen menus; English, German, French, Norwegian, Swedis

Administrator Settings 103 4.1.2 System Name System Name identifies the system:  On the welcome page.  During an MCU conference call.  When

TANDBERG 1500 MXP 104 4.1.3 International Name If the System Name contains Asian and non-Latin character text input, the International Name using L

Administrator Settings 105 4.1.4 Auto Answer The auto answer setting decides whether an incoming call is put through automatically or manually. O

TANDBERG 1500 MXP 106 4.1.5 Phone Book Settings Corporate Directory On The Corporate Directory is available in the menu. Off The Corporate Direct

Administrator Settings 107 4.1.6 External Services Settings External Services On When set to On External Services are available. Off When set to

TANDBERG 1500 MXP xii 6.13 Appendix 13 ...

TANDBERG 1500 MXP 108 4.1.7 Permissions Permissions contains settings for incoming MCU Calls, incoming telephone Calls, Far End Control, Remote So

Administrator Settings 109 Far End Camera Control On The far end will be able to: • Control your camera • Select your video sources • Activate your

TANDBERG 1500 MXP 110 4.1.8 Screen Settings Auto Layout On If Auto Layout is On the system will change layouts automatically depending on the nu

Administrator Settings 111 Picture Layout The Advanced Picture Layout is related to the Layout button on the remote control and it can be used at an

TANDBERG 1500 MXP 112 Example of 1+2 Picture outside Picture (wide screen). Example of 1+3 Picture outside Picture (wide screen). Note that th

Administrator Settings 113 Wide screen VGA or TV monitor in Normal (stretched) mode. Wide screen VGA or TV monitor In Wide (native) mode. VGA O

TANDBERG 1500 MXP 114 VGA Out Quality for Wide XGA: If VGA Monitor Format is set to Wide, PC Picture Format is set to Normal, VGA Out Quality is se

Administrator Settings 115 4.1.9 Software Options The system requires a valid option key to activate MultiSite and/or Presenter functionality. In o

TANDBERG 1500 MXP 116 4.1.10 Date and Time Settings NTP IP This is the NTP time server address from which the system can get updated time inform

Administrator Settings 117 4.2 Menu Settings Menu Settings contain the settings:  Input Editor Language  Menu Timeout In Call  Balloon Help

1 Introduction The TANDBERG 1500 MXP provides a reliable, secure and wireless capable video communication system with superior presentation capabil

TANDBERG 1500 MXP 118 4.2.1 Input Editor Language When the Input Editor Language is set to Chinese, Korean or Japanese the user will be able to en

Administrator Settings 119 4.2.2 Menu Timeout in Call The Main menu appears on the bottom line of the screen. Set Menu Timeout In Call to On if yo

TANDBERG 1500 MXP 120 4.2.3 Balloon Help It is possible to enable / disable the balloon help window. On Choose On if you want help text windows to

Administrator Settings 121 4.2.4 Administrator Password It is recommended to put an Administrator Password on the system. The Administrator Passw

TANDBERG 1500 MXP 122 4.2.5 Kiosk Mode Settings Kiosk Mode In Kiosk Mode the system is set to a simplified state where it can be controlled with

Administrator Settings 123 If Language Menu is enabled you will first see the language selection menu. Select language and the Welcome Menu will be di

TANDBERG 1500 MXP 124 Kiosk Mode - Auto Dial* On The system will automatically dial to the first contact in the Phone Book when he handset is lifted.

Administrator Settings 125 4.2.6 Startup Welcome Menu The Welcome Menu contains the Main Menu, System Status, your System Name and dial in number

TANDBERG 1500 MXP 126 Display Welcome Text The welcome text displays your system name and dial in numbers by default. It is possible to hide this in

Administrator Settings 127 4.2.7 Icons The following indicator icons may be set to on or off:  Mic Off  Volume Off  On Air  Encryption  Bad N

TANDBERG 1500 MXP 2  No missing features when traversing the firewall – works with H.264, MPEG4 audio, encryption.  Outside systems, such as home

TANDBERG 1500 MXP 128 4.3 Presentation Settings Presentation Settings contain:  Presentation Start  H.239  Call Video Source  Presentatio

Administrator Settings 129 4.3.1 Presentation Start If your system has Dual Stream capabilities, you can show two video streams at the same time (s

TANDBERG 1500 MXP 130 4.3.2 H.239 H.239 supports transmission of two video streams. It combines elements of Duo Video and People+Content. If H.239

Administrator Settings 131 4.3.3 Call Video Source The Call Video Source is the default video source you would like to use in a call. If you use M

TANDBERG 1500 MXP 132 4.3.4 Presentation Source The Presentation Source is connected to the Presentation button on the remote. Pressing the Present

Administrator Settings 133 4.3.5 Snapshot Source When you take a Snapshot, you get a snapshot of the Snapshot Source. Current is the default Snapsh

TANDBERG 1500 MXP 134 4.3.6 Auto-Display Snapshot Select Auto to automatically display a received snapshot. Turn Auto-Display Snapshot Manual if yo

Administrator Settings 135 4.3.7 PIP Appearance A Picture in Picture (PIP) is a smaller picture placed in one of the corners of the screen. The PI

TANDBERG 1500 MXP 136 4.3.8 PIP Placing PIP Placing lets you decide where the PIP shall appear. You can of course move the PIP with the Layout butt

Administrator Settings 137 4.3.9 VNC Settings VNC Settings is necessary when using a VNC presentation. See chapter PC Soft Presenter and VNC for mo

Introduction 3  Unicast Streaming – which allows broadcasting of audio/video via an IP network to a single compatible client (RealMedia™ or Apple Qu

TANDBERG 1500 MXP 138 4.4 Call Quality Call Quality contains the settings:  Video Algorithm  Audio Algorithm  AAC-LD 128kbps  Natural Vid

Administrator Settings 139 4.4.1 Video Algorithm The system will automatically select the best video algorithm based on the video source and the ca

TANDBERG 1500 MXP 140 4.4.2 Audio Algorithm The system will automatically select the best audio algorithm based on the call rate and the capabiliti

Administrator Settings 141 4.4.3 AAC-LD 128kbps (stereo audio) Specify a call rate for 128kbps AAC-LD. From this call rate and above, "1

TANDBERG 1500 MXP 142 4.4.4 Natural Video Choosing Natural Video will enable 60 fields* per second true interlaced picture for high motion video. T

Administrator Settings 143 4.4.5 Max Upstream Rate (kbps) The Max Upstream Rate (kbps) defines the desired maximum transmitted call rate. This is

TANDBERG 1500 MXP 144 4.4.6 Video Quality The different video sources need different Video Quality Settings. Main Camera, VCR, AUX and Split Screen

Administrator Settings 145 Sharpness*: Improved quality of detailed images and graphics, lower frame rate, ideal for enhancing quality at lower ba

TANDBERG 1500 MXP 146 Native PAL:  4CIF (704 x 576 pixels), Digital Clarity  448p (576 x 448)  iCIF (352 x 576 pixels), Natural Video  CIF (35

Administrator Settings 147 4.4.7 Default Call Settings Default Call Settings are connected with Call Settings in the call menu. If you leave Call

TANDBERG 1500 MXP 4 1.1 At a Glance Camera The high quality color main camera is mounted on top of the monitor. The main camera is controlled man

TANDBERG 1500 MXP 148 Select H.323 to ensure that the call is set up as an H.323 call. Select SIP to ensure that the call is set up as an SIP call.

Administrator Settings 149 Place this type of call by:  Set Network to ISDN  Set Bandwidth to 128 kbps  A field for the 2nd number pops up in

TANDBERG 1500 MXP 150 4.5 Audio Audio contains the settings:  Inputs  Outputs  Echo Control  Stereo Settings  Audio Leveling (AGC)  A

Administrator Settings 151 4.5.1 Inputs Mic and Audio input L-R (VCR Left/Right) By default, all inputs are enabled. Just plug in an audio sourc

TANDBERG 1500 MXP 152 Audio inputs VCR Left/Right are set to a default level which is adhered to by most manufacturers of audio-visual equipment and i

Administrator Settings 153 Signal levels - line level inputs Clipping level Nominal level Input menu level settings Vpp dBu dBu 0.0 dB 15.5 Vpp

TANDBERG 1500 MXP 154 4.5.2 Outputs Audio Out Audio out is internally connected to the monitor loudspeakers. The signal is a mix of audio from fa

Administrator Settings 155 4.5.3 Echo Control Microphone The microphone input has an acoustic echo canceller. In addition to echo cancellation, t

TANDBERG 1500 MXP 156 4.5.4 Stereo Settings Stereo Input Mode (stereo audio) If Stereo Input mode is on, Audio in L/R (VCR Left/Right) will behave

Administrator Settings 157 4.5.5 Audio Leveling (AGC) On Select On to allow automatic adjustments (Automatic Gain Control) of audio levels. Wh

Introduction 5 sitting in an open plan office, this can cause problems. Use the little, white switch placed under the batteries to change the reach of

TANDBERG 1500 MXP 158 4.5.6 Alert Tones and Volume Video Call Alert Tone and Telephone Alert Tone To help distinguish between incoming video call

Administrator Settings 159 4.6 Video Video contains the settings:  MCU Status Line  Floor to Full Screen  Web Snapshots  MultiSite Pictur

TANDBERG 1500 MXP 160 4.6.1 MCU Status Line On The MultiSite / MCU / DuoVideo indicators will be displayed and provide information about the confe

Administrator Settings 161 4.6.2 Floor to Full Screen When "Floor to Full Screen" is enabled, someone who requests floor will be seen

TANDBERG 1500 MXP 162 4.6.3 Web Snapshots The system is able to generate JPEG snapshots and provide them when requested (as ‘http get’ or via ftp).

Administrator Settings 163 4.6.4 MultiSite Picture Mode MultiSite* Picture Mode determines the default layout of a MultiSite call. Available lay

TANDBERG 1500 MXP 164 Voice Switched mode

Administrator Settings 165 4.6.5 Video Name As a default, the video inputs are given the names Main Cam, PC, Doc Cam, VCR, AUX or VNC, dependent on

TANDBERG 1500 MXP 166 4.7 Security Security contains the settings:  Encryption  Encryption Mode  Passwords

Administrator Settings 167 4.7.1 Encryption (Country specific) Auto The system will try to set up calls using encryption. Point to point calls:

TANDBERG 1500 MXP 6 1.2 Menu Structure The menu structure is divided into two parts. The Main Menu is available for all users and contains all the

TANDBERG 1500 MXP 168 4.7.2 Encryption Mode Auto The system will try to use the most secure encryption - AES, dependent on the capabilities of

Administrator Settings 169 4.7.3 Passwords Administrator Password, IP Access Password, Streaming Password, VNC Password, Access Code and Remote Sof

TANDBERG 1500 MXP 170 4.8 Network The network menu contain:  ISDN-BRI Settings  LAN Settings  Network Profiles  Data Port

Administrator Settings 171 4.8.1 ISDN-BRI Settings To make sure your system will work properly using ISDN-BRI, make the following settings: 1.

TANDBERG 1500 MXP 172 Advanced ISDN Settings Sub address Using a sub address enables you to connect up to eight ISDN terminals to the same ISDN te

Administrator Settings 173 4.8.2 LAN Settings LAN Settings contain:  IP Settings  H.323 Settings  SIP Settings  Wireless LAN Settings  SN

TANDBERG 1500 MXP 174 4.8.2.1 IP Settings Remember to restart the system after making changes to IP Settings. This can be done by selecting the “Sav

Administrator Settings 175 Ethernet Speed Auto The codec will auto-detect the speed/duplex on the LAN. 10/Half The codec will connect to the LAN us

TANDBERG 1500 MXP 176 DNS Settings DNS Server 1-5 DNS Server defines the network addresses for DNS servers. Up to 5 addresses may be specified. I

Administrator Settings 177 4.8.2.2 H.323 Settings E.164 alias This is the E.164 address of the system. The E.164 address is equivalent to a telepho

Introduction 7 Note that the system features and menu settings may vary depending on network selection and software package.

TANDBERG 1500 MXP 178 Gatekeeper Settings Gatekeeper Discovery Auto The system will automatically try to register to any available gatekeeper. If

Administrator Settings 179 CallManager Settings CallManager IP This is the CallManager IP-address that is used if you specify H.323 Call Setup: Ca

TANDBERG 1500 MXP 180 Advanced H.323 Settings The Advanced H.323 Settings only have an effect if they are supported by your IP infrastructure. NA

Administrator Settings 181 H.323 Ports Static When selecting static H.323 ports for TCP connections the ports 5555 to 5574 will be used for Q.931 an

TANDBERG 1500 MXP 182 4.8.2.3 SIP Settings Mode On Setting the SIP mode to on will enable the system for incoming and outgoing SIP calls. Off

Administrator Settings 183 Server Address The Server Address is the manually configured address for the outbound proxy and registrar. It is possible

TANDBERG 1500 MXP 184  RFC 2190 RTP Payload Format for H.263 Video Streams  RFC 2429 RTP Payload Format for the 1998 Version of ITU-T Rec. H.263

Administrator Settings 185 4.8.2.4 Wireless LAN Settings SSID (Service Set Identification) Example “WLANNETWORK”. Defines a local network id for t

TANDBERG 1500 MXP 186 Encryption Select Encryption if you want to use WEP encryption on your Wireless LAN connection. Increased encryption level will

Administrator Settings 187 4.8.2.5 SNMP Settings SNMP Settings SNMP Trap Host identifies the IP-address of the SNMP manager. SNMP (Simple Netw

TANDBERG 1500 MXP ii Trademarks and Copyright All rights reserved. This document contains information that is proprietary to TANDBERG. No part of t

2 Installation Precautions:  Never install communication wiring during a lightning storm.  Never install jacks for communication cables in we

TANDBERG 1500 MXP 188 4.8.2.6 IP Services NTP IP This is the NTP time server address from which the system can get updated time information. This

Administrator Settings 189 4.8.2.7 Quality of Service QoS Type Off No QoS is used. Diffserv Diffserv QoS method is used. Please see below for d

TANDBERG 1500 MXP 190 Auto will provide the following priority: Audio 4 Diffserv Video Used to define which priority Audio, Video, Data and S

Administrator Settings 191 4.8.2.8 IEEE 802.1x 802.1X The system may be connected to an IEEE 802.1x LAN network. Supported 802.1x protocols are E

TANDBERG 1500 MXP 192 4.8.3 Network Profiles This menu consists of 7 network profiles; a prefix can be added for each profile. If you add a prefix

Administrator Settings 193 4.8.4 Data Port The system provides up to two standard RS232 serial ports to allow a computer to be connected for data t

TANDBERG 1500 MXP 194 4.8.5 Restore Default Settings Restore Default Settings will restore all administrator settings. Note that this will not aff

5 Peripheral Equipment Using the optional peripheral devices outlined in this chapter and the many others available, you will be able to build your

TANDBERG 1500 MXP 196 5.1 Interfaces 5.1.1 Video 1 Video Input  1 VGA/DVI-I (DVI = Digital Video Interface, I = Integrated Digital & Anal

Peripheral Equipment 197 Pin Signal Assignment Pin Signal Assignment Pin Signal Assignment 1 T.M.D.S. Data2- 9 T.M.D.S. Data1- 17 T.M.D.S. Data0

Installation 9 2.1 Unpacking When unpacking the TANDBERG 1500 MXP, you will find the following items:

TANDBERG 1500 MXP 198 Signal name CONN. 1 CONN. 2 CONN. 3 CONN. 4 CONN. 5 Cable color DDC Clock 6 15 Orange DDC Data 7 12 White Verti

Peripheral Equipment 199 5.1.2 Audio 2 Audio Inputs  2 audio inputs (line level) via RCA connectors. All audio inputs are active by default. For

TANDBERG 1500 MXP 200 Audio output connector specification: Connector label Audio outputs Signal type Unbalanced Connector (codec) Female RCA/phon

Peripheral Equipment 201 5.1.3 Network Ethernet: 1 x Ethernet (RJ-45 Jack) LAN interface (10/100 Mb) up to 2 Mbps or 2.3 Mbps depending on the bandwid

TANDBERG 1500 MXP 202 5.1.4 Data port The data port(s) are implemented as Data Communications Equipment (DCE). The connector used is female 9-pin D-

Peripheral Equipment 203 5.2 Document Camera A document camera can be used for showing text, diagrams and a variety of graphical material as well a

TANDBERG 1500 MXP 204 5.3 DVD / VCR DVD/VCR Playback Mono For playback, connect a cable between Video Out on the VCR and Video In (VCR) on the

Peripheral Equipment 205 5.4 Additional Cameras Extra fixed Cameras You can connect extra fixed cameras to your system, for example, a whiteboard

TANDBERG 1500 MXP 206 5.5 Additional Microphones If your environment is such that you require more than one microphone for your room, e.g. you have

Peripheral Equipment 207 5.6 The TANDBERG DNAM and Speakers TANDBERG 6000 MXP Profile, TANDBERG 6000 MXP, TANDBERG 7000 MXP, TANDBERG 8000 MXP and

TANDBERG 1500 MXP 10 2.2 Connecting Cables Connect the cables according to the figure below:

TANDBERG 1500 MXP 208 TANDBERG 6000 MXP Profile DNAM configuration Center Speakers + Integrated Stereo Speakers The DNAM Amplifier*:  3 x 50W c

Peripheral Equipment 209 The DNAM Loudspeaker Cabinet (Center Speakers)*:  3-way Center Speaker system  Frequency range 50Hz - 20kHz  2 x 13

TANDBERG 1500 MXP 210 The Mini-DNAM Loudspeaker Cabinet*: The Mini-DNAM speaker cabinet specification:  2 * 15W Stereo Speakers, high quality

Peripheral Equipment 211 5.7 Stereo Speaker Kit Note that the following applies only for systems with a stereo S/PDIF output. The Stereo Speaker

TANDBERG 1500 MXP 212

Peripheral Equipment 213 5.8 Telephone Add-On The system has a built in audio bridge* that can bring in Voice over IP (VoIP) telephony or normal te

TANDBERG 1500 MXP 214 5.9 Dual Monitor Note that this requires a system with dual monitor video output.

Peripheral Equipment 215 5.10 XGA Monitors and Projectors (Optional) Some TANDBERG systems can be delivered with optional single or dual TV/XGA mo

TANDBERG 1500 MXP 216 5.11 VESA Display Power Management Because of the tremendous amount of energy consumed by monitors when operating, the system

Peripheral Equipment 217 5.12 Digital Monitor Power Management DMPM is monitor power management applied over the digital DVI interface. TANDBERG su

Installation 11 2.3 Monitor Configuration Note that all necessary default monitor settings are done prior to shipping the product and the follo

TANDBERG 1500 MXP 218 5.13 Extended Display Identification Data (EDID) Extended Display Identification Data (EDID) is a VESA standard data format t

Peripheral Equipment 219 Tested and verified monitors, EDID & Timing Listed below are some of the monitors TANDBERG have tested and verified aga

6 Appendices Appendices:  Appendix 1: Technical Specification  Appendix 2: Bandwidth Information  Appendix 3: Environmental considerations 

Appendices 221 6.1 Appendix 1 Technical Specification UNIT DELIVERED COMPLETE WITH: 17" Wide Screen LCD, Wireless remote control, Integrated

TANDBERG 1500 MXP 222 448p (576 x 448 pixels) NATIVE PC RESOLUTIONS: XGA (1024 x 768 pixels) SVGA (800 x 600 pixels) VGA (640 x 480 pixels) WIDE (16:9

Appendices 223 CP4 and Voice Switched Best Impression (Automatic CP Layouts) H.264, Encryption, Digital Clarity Dual Stream from any site ISDN & I

TANDBERG 1500 MXP 224 6.2 Appendix 2 Bandwidth information for TANDBERG endpoints Model 8000MXP, 7000MXP 6000MXP, Maestro Bandwidth Point to p

Appendices 225 Model 3000MXP / 3000NET MXP 2000MXP, 1500MXP Bandwidth Point to point ISDN / IP Standard: 384 / 1536 Option: 512 / 1920 3000NET: 38

TANDBERG 1500 MXP 226 Picture Mode MultiSite VS, CP4, CP5+1 VS, CP4, CP5+1 Model 770MXP 1000MXP Bandwidth Point to point ISDN / IP Standard: 768

Appendices 227 6.3 Appendix 3 Environmental considerations This section explains how to carry out basic adjustments and simple tests to ensure th

TANDBERG 1500 MXP 12 Select monitor language Open the Setup menu on the monitor. Select Language and choose your desired language. Note that for bes

TANDBERG 1500 MXP 228 6.4 Appendix 4 Guidelines for setting up videoconferencing rooms The following are a set of guidelines to consider when eit

Appendices 229 If the system has a separate microphone, it should be placed at the front of the table to ensure that all speech will be detected. T

TANDBERG 1500 MXP 230 6.5 Appendix 5 Security The system has several features both to protect from unauthorized use and system access: Access Cod

Appendices 231 By setting an IP Access Password on the system, all access to the system using IP (Telnet, FTP and WEB) requires a password. This pass

TANDBERG 1500 MXP 232 backwards compatibility) with extended Diffie Hellman key distribution via H.320, H.323 and Leased Line connections. The TANDBE

Appendices 233 6.6 Appendix 6 Using the file system It is possible to access a file system within the TANDBERG system by using ftp: DOS-window:

TANDBERG 1500 MXP 234 6.7 Appendix 7 Web Interface It is possible to access and maintain the system remotely via a local area network (LAN) using

Appendices 235 6.8 Appendix 8 (Not available on all TANDBERG systems) Connecting the system to PRI/T1 Using CSU adapter Connecting the system to

TANDBERG 1500 MXP 236 6.9 Appendix 9 Connecting the system to the Switched 56 network Using Telesync TS-256 SW56/ISDN adapter Connecting the syste

Appendices 237 6.10 Appendix 10 Connecting the system to ISDN using NT1 network adapters Connecting Connect the first ISDN cable from ISDN 1 on th

Installation 13 2.4 System Configuration The system must be configured for each installation. Configuration settings can be made via the system men

TANDBERG 1500 MXP 238 6.11 Appendix 11 (Not available with TANDBERG 1500 MXP and set top systems) WAVE II Camera Pinouts and Connectors 8-PIN R

Appendices 239 6-PIN RJ (modular jack): This connector is used when cascading cameras: Control (out) signal and external camera detection. Note: It do

TANDBERG 1500 MXP 240 Dimensions Front view: Side view: Rear view: Underside view:

Appendices 241 6.12 Appendix 12 Remote Control (TRC 3 / TRC4) The TANDBERG remote control transmits IR-signals using the following parameters: Pr

TANDBERG 1500 MXP 242 Remote Control key code map: Button codes Remote control (TRC 3 / TRC 4) Button codes Remote Control (TRC 3) Remote Control (TR

Appendices 243 6.13 Appendix 13 Cisco CallManager registration Configuring an H.323 client on the CallManager 4.0 The registration of a H.323 cl

TANDBERG 1500 MXP 244 6.14 Appendix 14 Diagnostic Tools for IP To use these tools, will require using a PC and setting up a telnet session towards

Appendices 245 Function Port Type Gatekeeper Discovery (RAS) 1719 UDP Q.931 Call Setup 1720 TCP H.245* Range 5555-5574 TCP Video Range 2326-

TANDBERG 1500 MXP 246 6.15 Appendix 15 System Upgrade Before starting the software upgrade of the TANDBERG MXP system, please make sure to have th

Appendices 247 The following page will now be displayed: Figure 1 3. Enter the Release key in the ‘Release Key’ field and press the ‘Install Softw

TANDBERG 1500 MXP 14 5. Screen Settings When using wide screen (16:9) monitors, set TV Monitor Format to Wide (16:9). TANDBERG also recommends setti

TANDBERG 1500 MXP 248 A new page will now be displayed: Figure 2 4. Type in the path to where the new software file is stored, or select the file b

Appendices 249 5. Type in your IP password (default is “TANDBERG”) as password. 6. Type ‘put <software file name> and press Enter. The new sof

TANDBERG 1500 MXP 250 The following page will now be displayed: Figure 3 5. Enter the release key for the system to be upgraded in the ‘Release Key

Appendices 251 In the menu on the system under ‘Control Panel/System Information’, the installed software should now be displayed as the ‘Software Ver

TANDBERG 1500 MXP 252 6.16 Appendix 16 Declaration of Conformity Contact your TANDBERG representative for a Declaration of Conformity.

7 Glossary # 199 AV1: External input for the TANDBERG/LOEWE monitor. 2nd monitor: The second monitor of your videoconferencing system. The second mon

TANDBERG 1500 MXP 254 B Bandwidth: Decides the quality of the video call. High bandwidth gives high quality. C Call Control Data Triggered: Uses TxDat

Glossary 255 Diagnostics: Allows testing of individual system components and displays the current system settings. Digital ClarityTF: Participants enj

TANDBERG 1500 MXP 256 G G.711: Audio algorithm for normal quality audio (telephone quality, 3.1 kHz) The system will always have G.711 enabled. G.722:

Glossary 257 M Main Camera: Your camera. Video input 1 Max call length: This feature will automatically end both incoming and outgoing calls when the

Installation 15 5. Data Port Please refer to Data Port for details 6. Save changes Remember to save any changes made in the menu by selecting the

TANDBERG 1500 MXP 258 Non Standard Facility: The network provider may require service selection in your ISDN configuration. Valid NSF codes are from 1

Glossary 259 Restart: Restarts the system. Restore defaults: Restores system settings to the factory defaults. Restricted call: A call to a 56 kbps ne

TANDBERG 1500 MXP 260 Streaming Source: Select between local video and/or far end video to be streamed. Local and far end audio is always streamed. St

Glossary 261 W WAVE II Camera: Wide Angle View Camera - delivers the widest angle of view in the industry. Welcome menu: The welcome menu displays the

TANDBERG 1500 MXP 262 8 Index A Access Code...84, 108 Add Another Call...36 Ad

Index 263 Restart ...98 Restore defaults...194 S Screen Settin

3 General Use Wake up the system When the system is not in use, it is in standby mode and the screen is black. Wake up the system by picking up th

General Use 17 3.1 The Welcome Screen When the system is switched on, the welcome screen will be displayed. The welcome screen presents the menu an

User Manual iii eCos eCos, the Embedded Configurable Operating System. Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003 Red Hat, Inc. Copyrig

TANDBERG 1500 MXP 18 3.2 Using the Remote Control The system is controlled with a remote control. Think of the remote control as a mobile phone with

General Use 19 in and out.* 12. Selfview displays your outgoing video. Press Selfview again to turn selfview off, see Selfview. 13. Use the Phone Bo

TANDBERG 1500 MXP 20 The remote control (TRC 4)**: 1. Change video source. If possible, you will start open a Dual Stream. Press the video source

General Use 21 presentation source. If the Presentation key is held down for 1 second then the Presentation video sources menu will appear, see Presen

TANDBERG 1500 MXP 22 3.2.1 Navigation Arrow keys and OK Navigate in the menu with the arrow keys on the remote control. The orange selector on sc

General Use 23 3.2.2 Selfview The term “Selfview” means the outgoing image. In a normal call using the main camera, this is the image of you. The

TANDBERG 1500 MXP 24 Example: You are using the system as a PC and get an incoming call. When the setting “Use Screen as Local PC monitor” is On,

General Use 25 3.2.3 Layout The layout of the screen can either be shown as Picture in Picture (PIP) or Picture outside Picture (POP) when displ

TANDBERG 1500 MXP 26 3.2.4 Mic Off To mute the microphone during a call, press the Mic off button. An on-screen indicator appears in the upper ri

General Use 27 3.2.5 Volume + and - Press the Volume key to adjust the volume level. An on-screen indicator will show the current level.

TANDBERG 1500 MXP iv Disclaimer The information in this document is furnished for informational purposes only, is subject to change without prio

TANDBERG 1500 MXP 28 3.2.6 Number and Letter keys Pressing a number key when outside a call will bring up the call menu. When in a call, the numbe

General Use 29 3.2.7 Touch Tones To activate dialing touch tones during a call, press the Touch tones button. Otherwise the number keys will acti

TANDBERG 1500 MXP 30 3.3 On-screen Indicators The system has a number of icons signaling different settings: Microphone Off This indicator is sh

General Use 31 Telephone This indicates that there is a telephone participant in the conference. The displayed number indicates how many telephone p

TANDBERG 1500 MXP 32 3.4 Using the Menu Press the Menu button on the remote control to display the menu. The menu contains all functions needed

General Use 33 3.5 Make a Call Display the call menu by either: 1. Select Make a Call from the menu, or 2. Press the green Call button on the rem

TANDBERG 1500 MXP 34 3.5.1 Place Video Call In the Make a Call menu enter the Dial Number either: 1. Manually, or 2. Select the book symbol in

General Use 35 3.5.2 Place Telephone Call In the Make a Call menu, enter the Dial Number either: 1. Manually, or 2. Select the book symbol in o

TANDBERG 1500 MXP 36 3.5.3 Add Call (Optional feature) Conference systems with built-in MultiSite can handle up to 4 video calls and 3 telepho

General Use 37

User Manual v Environmental Issues TANDBERG visual communication products significantly reduce the need for travel and thereby help reduce various

TANDBERG 1500 MXP 38 3.5.4 Call Settings The Call Settings specifies the quality of the call. Each call will be set up with the Default Call Settin

General Use 39 3.5.5 Streaming Streaming lets you broadcast your meeting to participants on the web. The web participants can listen to the meeti

TANDBERG 1500 MXP 40 Streaming Source*  Auto: Enables streaming of both local and far end video. Selection of which site to be streamed is done

General Use 41 3.6 Answer an incoming call How to answer an incoming call:  To accept an incoming call, press the OK button or the green Call bu

TANDBERG 1500 MXP 42 3.7 End Call How to end a call:  Press the red End Call button on the remote control, or  Press the Menu button on the re

General Use 43 3.8 Standby The system will automatically go to Standby mode when it is not in use. In standby mode, the screen(s) are black. It is h

TANDBERG 1500 MXP 44 3.8.1 Delay Standby for 1 hour Delay Standby for 1 hour postpones the system from entering standby mode for 1 hour. This f

General Use 45 3.8.2 Delay Standby for 3 hours Delay Standby for 3 hours postpones the automatic standby mode for 3 hours. This function is usef

TANDBERG 1500 MXP 46 3.8.3 Do Not Disturb To prevent the system from accepting any incoming calls, activate the Do Not Disturb function. The call

General Use 47 3.9 Phone Book The Phone Book is available via the Phone Book button on the remote control or from the Make a Call menu. Using the P

TANDBERG 1500 MXP vi Operator Safety Summary For your protection, please read these safety instructions completely before operating the equipment a

TANDBERG 1500 MXP 48 3.9.1 Call Log The Call Log lists Placed Calls, Missed Calls and Received Calls. That allows the user to see which calls that

General Use 49 3.9.2 My Contacts My Contacts are the locally stored contacts on the system. This means that it is possible to add new contacts and e

TANDBERG 1500 MXP 50 The following functions are available from My Contacts:  Call Now  New Contact  New MultiSite Contact  Edit Contact  De

General Use 51 3.9.2.1 Add New Contact The New Contact function is available from My Contacts. Add a new contact to My Contacts by: 1. Select t

TANDBERG 1500 MXP 52 3.9.2.2 New MultiSite Contact (Optional feature*) The New MultiSite Contact function is available from My Contacts. It is p

General Use 53 Bandwidth for a MultiSite Contact call When calling a MultiSite Contact, the system will try to call the participants with their sp

TANDBERG 1500 MXP 54 3.9.2.3 Edit Contact The Edit Contact function is available from My Contacts. How to edit a contact in the Local Phone Book

General Use 55 3.9.2.4 Delete Contact The Delete Contact function is available from My Contacts. How to delete a contact: 1. Select the conta

TANDBERG 1500 MXP 56 3.9.3 Global Contacts When selecting Phone Book the phone book opens showing the Global Contacts* or the Corporate Directory**

General Use 57 3.9.3.1 Up one Level Global Contacts can be arranged in a tree structure with several sub folders. Use the Up one Level button to na

User Manual vii  ISDN cables - CAUTION - To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.  Servicing - Do no

TANDBERG 1500 MXP 58 3.9.3.2 Search The phone book can contain an unlimited amount of global contacts. Using search makes it easier to find the w

General Use 59 3.9.3.3 Copy Contact to My Contacts The Copy Contact to My Contacts function is available from the Placed Calls, Missed Calls, Rec

TANDBERG 1500 MXP 60 3.10 Camera Control Manual Camera Control The TANDBERG 1500 MXP has manual camera control. You can focus the camera using the

General Use 61 3.10.1 Far End Control Far End Control allows you to control your conference partner’s camera. An example of when this feature cou

TANDBERG 1500 MXP 62 3.11 Presentation The Presentation Functionality in the system enables you to show other available video sources in addition to

General Use 63 3.11.1 Presentation Key The quickest way to show a presentation is to use the presentation key on the remote control. The presenta

TANDBERG 1500 MXP 64 3.11.2 Presentation Menu The Presentation menu offers you all available video sources; Main Camera, PC, Document Camera, VCR,

General Use 65 3.11.3 PC Presenter (DVI/VGA Input) (Optional feature - not available on all systems) Users often have their presentations on a lap

TANDBERG 1500 MXP 66 3.11.4 PC Soft Presenter and VNC (Optional feature) PC SoftPresenter is used to display PC images on your system without u

General Use 67 3.11.5 Dual Stream (DuoVideoTF/H.239) (Optional feature - not available on all systems) With Dual Stream you have the opportunity

TANDBERG 1500 MXP viii Contact us If you have any questions, comments or suggestions, please see the Online Support section at www.tandberg.net. I

TANDBERG 1500 MXP 68 3.11.6 Take New Snapshot The system can take a snapshot of your live video. Snapshot is handy when you are in a call with a

General Use 69 3.11.7 Display Snapshot The system stores the last sent or received Snapshot. The snapshot is deleted automatically after the call

TANDBERG 1500 MXP 70 3.12 Conference Services A Multipoint Control Unit (MCU) enables several sites to participate in the same conference. During an

General Use 71 Example of MultiSite for mid- to low end systems. Note that the illustrations may differ from the actual product. Using the system’

TANDBERG 1500 MXP 72 Using an external MCU with limited Chair Control Support you may have the following services With an external MCU that does not

General Use 73 3.12.1 Request Floor and Release Floor When requesting floor, your video will be broadcasted in full screen to all other participa

TANDBERG 1500 MXP 74 3.12.2 Conference Layout (Only supported by TANDBERG MultiSite*) With a TANDBERG MultiSite you can choose between the layout

General Use 75 3.12.3 Terminal Names Choose Terminal Names to see a list of the participants of the MultiSite conference. Press Cancel to go back

TANDBERG 1500 MXP 76 3.12.4 Chair Control (Not supported by TANDBERG MCU or MultiSite) As chairman, you have access to more MultiSite Services. Se

General Use 77 3.12.5 Assign Floor and Release Floor from Participant Assign Floor allows the chairman to select which of the conference particip

User Manual ix Table of Contents 1 Introduction...

TANDBERG 1500 MXP 78 3.12.6 View Site and End View (Not supported by TANDBERG MCU or MultiSite) View Site allows you to view any participant in t

General Use 79 3.12.7 Disconnect Participant Disconnect Participant allows the chairman to disconnect any participant in the conference. In a mul

TANDBERG 1500 MXP 80 3.12.8 Terminate Meeting Terminate Meeting allows the chairman to terminate the conference altogether. In a MultiSite call,

General Use 81 3.12.9 More about MultiSite (embedded MCU) (Optional Feature*) Calling in to a MultiSite Any system can be part of a MultiSite con

TANDBERG 1500 MXP 82 3.13 Control Panel The Control Panel contains the features:  Diagnostics  Text Chat  Audio Demonstration  Administr

General Use 83 3.13.1 Diagnostics Diagnostics allows testing of individual system components and displays the current system settings. Diagnosti

TANDBERG 1500 MXP 84 3.13.2 System Information Select System Information to view system numbers, line status, software version, hardware serial num

General Use 85 3.13.3 Channel Status Comprehensive information about the call progress is available through the Channel Status window. This window

TANDBERG 1500 MXP 86 3.13.4 Call Status Comprehensive information about the call is available through the Call Status window. The menu has two colu

General Use 87 3.13.5 System Selftest The system performs a check to determine internal hardware integrity. System Selftest is useful when you want