Tandberg Utility Bedienungsanleitung PDF herunterladen (Seite 23)

3 General Use

Wake up the system

When the system is not in use, it is in standby mode and the screen is black. Wake up the system

by picking up the handset. An incoming call or pressing any key on the Compass MXP will also

wake up the system.

Quick Key for IP Address

If the IP address of the system has been mislaid or forgotten it can be shown temporarily on the

screen by pressing the central button on the Compass MXP for at least 5 seconds, until the

address appears on the screen. On the Utility MXP the remote control can be removed from the

cabinet and the OK button pressed in the same manner.

Quick Key to Deactivate Kiosk Mode

If it is required to deactivate the Kiosk Mode without using the telnet or web interface the following

must be performed using the remote control stored inside the cabinet. This is only possible if the

setting Allow Use of Remote Control has been saved as ON. Please refer to later chapters on

where the remote control should be directed to enable IR reception.

 Press 5 times on the Phone Book symbol then once on the number 3.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 187 188

Keine Kommentare

Tandberg Utility Bedienungsanleitung Seite 23